Altrad Belle 100XT Concrete Mixer
The Belle Premier 100XT concrete mixer is a popular choice for professional construction projects. However, like any heavy-duty equipment, it can experience issues due to wear, improper maintenance, or operation. Here are some common problems and their potential solutions:
1. Engine Won’t Start
- Cause:
- Low fuel or fuel contamination.
- Dirty or clogged air filter.
- Faulty ignition system.
- Starter motor issues.
- Solution:
- Check and refill fuel, ensuring it is clean and fresh.
- Inspect and clean/replace the air filter.
- Inspect the starter motor and connections; replace damaged components.
2. Mixer Drum Won’t Rotate
- Cause:
- Faulty or loose drive belt.
- Motor malfunction or electrical failure.
- Overloaded drum.
- Solution:
- Inspect the drive belt for wear or damage; tighten or replace as needed.
- Test the motor and electrical connections for faults; replace defective parts.
- Avoid overloading the drum and maintain a proper load balance.
3. Unusual Noise During Operation
- Cause:
- Worn bearings or gears.
- Loose or misaligned components.
- Insufficient lubrication.
- Solution:
- Inspect bearings and gears for wear; replace as necessary.
- Tighten and align loose components.
- Lubricate moving parts according to the manufacturer’s recommendations.
4. Excessive Vibration
- Cause:
- Imbalanced drum load.
- Damaged or worn mounting points.
- Loose bolts or connections.
- Solution:
- Ensure materials are evenly distributed in the drum.
- Replace damaged mounts or rubber isolators.
- Tighten all bolts and connections securely.
5. Mixer Overheating
- Cause:
- Continuous prolonged use without breaks.
- Blocked or inefficient cooling system.
- Motor issues.
- Solution:
- Allow the mixer to cool periodically during extended use.
- Clean the cooling vents and ensure proper airflow.
- Check motor for overheating signs and repair or replace as needed.
6. Concrete Sticking to the Drum
- Cause:
- Improper cleaning after use.
- Mixing for too long or at the wrong speed.
- Solution:
- Clean the drum thoroughly after each use with water and a scraper.
- Follow the manufacturer’s guidelines for mixing times and speeds.
7. Electric Motor Issues (if applicable)
- Cause:
- Faulty electrical connections or switches.
- Overloading or overheating.
- Solution:
- Inspect and repair damaged wires or connections.
- Use appropriate circuit protection and avoid overloading.
8. Poor Mixing Performance
- Cause:
- Worn or damaged paddles inside the drum.
- Incorrect mix ratio.
- Solution:
- Replace worn paddles or adjust them if misaligned.
- Use the correct ratio of materials as specified by the manufacturer.
9. Corrosion and Rust
- Cause:
- Exposure to water and cement residue.
- Lack of regular maintenance.
- Solution:
- Clean and dry the mixer thoroughly after use.
- Apply anti-corrosion treatments or paint as preventive maintenance.
Preventive Tips:
- Perform regular maintenance checks according to the user manual.
- Train operators to handle the mixer properly to minimize wear and tear.
If persistent issues occur, consider consulting a professional technician. – That’s Us!Â
Spares & parts bibliography
For all spares and parts we recommend our sister company – HTS Spares
Main Parts Page:Â Belle Premier XT | We have a considerable choice of Belle Premier XT in stock available for next day delivery!
Mixer Drum Full Assembly: Belle Premier 100XT Mixer Drum With Paddles | Belle Premier 100XT Mixer Drum (Complete With Paddles) | Genuine part
Electric Motor April 06>: Belle Premier XT Electric Motor | Full Assembly From 2006
Electric Motor Assembly Pre July 2002: Belle Premier XT Electric Motor | Full Assembly Up To 2002