Altrad Belle 175XT Concrete Mixer
The Belle Premier 175XT is a robust concrete mixer designed for heavy-duty use. However, like any machinery, it can encounter issues. Below is a list of common problems, their potential causes, and solutions:
1. Engine Won’t Start
- Cause:
- Empty fuel tank or stale fuel.
- Clogged fuel filter.
- Faulty ignition coil.
- Cold weather affecting fuel combustion.
- Solution:
- Refill the fuel tank with fresh fuel.
- Check and replace the fuel filter if clogged.
- Inspect and replace the ignition coil if necessary.
- Use winter-grade fuel or a cold start aid in colder climates.
2. Drum Fails to Rotate
- Cause:
- Worn or loose drive belt.
- Faulty gearbox or motor.
- Overloaded drum or debris inside the drum.
- Solution:
- Check the drive belt for wear or looseness; tighten or replace as needed.
- Inspect the gearbox and motor for faults and repair or replace if required.
- Clear the drum and avoid overloading during operation.
3. Unusual Noise or Grinding Sounds
- Cause:
- Worn bearings or gears.
- Loose bolts or components.
- Lack of lubrication.
- Solution:
- Inspect and replace worn bearings or gears.
- Tighten any loose components.
- Lubricate moving parts as recommended in the user manual.
4. Mixer Overheating
- Cause:
- Prolonged use without rest.
- Blocked cooling vents or fan issues.
- Motor overheating due to electrical faults.
- Solution:
- Allow breaks during extended use.
- Clean cooling vents and ensure proper airflow.
- Test the motor for overheating and repair or replace if necessary.
5. Concrete Sticking to Drum
- Cause:
- Failure to clean the drum after use.
- Improper mixing speed or duration.
- Solution:
- Clean the drum thoroughly after every use with water and a stiff brush.
- Operate the mixer at the correct speed and follow recommended mixing times.
6. Poor Mixing Performance
- Cause:
- Damaged or misaligned drum paddles.
- Incorrect mix proportions.
- Solution:
- Inspect and replace or realign drum paddles.
- Use the correct mix ratio as per project requirements.
7. Excessive Vibration
- Cause:
- Imbalanced load in the drum.
- Loose mounting bolts or isolators.
- Solution:
- Distribute materials evenly in the drum.
- Inspect and tighten loose bolts or replace damaged isolators.
8. Electrical Motor Issues (if applicable)
- Cause:
- Faulty wiring or switches.
- Circuit breaker tripping due to overload.
- Solution:
- Check and repair damaged wiring or replace faulty switches.
- Ensure the motor is not overloaded and use appropriate circuit protection.
9. Rust or Corrosion
- Cause:
- Prolonged exposure to water or cement residue.
- Solution:
- Clean and dry the mixer after every use.
- Apply rust prevention coatings or paint periodically.
Preventive Maintenance Tips:
- Regularly inspect and service your mixer based on the manufacturer’s maintenance schedule.
- Store the mixer in a dry, sheltered location when not in use.
- Use high-quality replacement parts to ensure long-term reliability.
If persistent issues arise, consult a qualified technician – That’s Us!
Spares & parts bibliography
For all spares and parts we recommend our sister company – HTS Spares
Main Parts Page:Â Belle Premier XT | We have a considerable choice of Belle Premier XT in stock available for next day delivery!
Mixer Mainframe: Belle Premier Mainframe 175Xt, 200Xt | Belle Premier XT Frame 175/200Xt Available from HTS Spares who offer a nationwide next day delivery.
Mixer Drum Full Assembly: Belle Premier 175XT Mixer Drum With Paddles | Belle Premier 175XT Mixer Drum (Complete With Paddles) | Genuine part
Electric Motor April 06>: Belle Premier XT Electric Motor | Full Assembly From 2006
Electric Motor Assembly Pre July 2002: Belle Premier XT Electric Motor | Full Assembly Up To 2002